Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Automatic Transmission Fluid in a Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

Let's see how to change the automatic transmission fluid in a Land Rover Evoque: (obviously, specific tools are required for this job and this is for illustrative purposes) first, remove the underbody cover to access the transmission: you will need to lift the vehicle properly.

Position a drain pan to allow the transmission to drain some fluid so you can add the cleaning additive.

Insert the oil and additive into the appropriate compressor. At this point, take the vehicle for a test drive to circulate the additive in the transmission and check for any issues.

Now you can lift the vehicle again and remove all the fluid to start the cleaning procedure. The cleaning oil is inserted into the special machine.

From two different feeds, the machine recovers the old fluid and then pushes in the new fluid. Use the compressor to add a special additive.

Watch for fluid to come out from the bottom, indicating the level has been reached. Reinstall the hoses and add more fluid to achieve the perfect level even when hot. Perform a final test drive, and the job is complete.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Land Rover Evoque (2011-2018 / L538, MK 1) In this tutorial, you will see how to unlock the automatic transmission in the Land Rover Evoque, a very simple and quick operation to perform in cas…
Land Rover Evoque (2011-2018 / L538, MK 1) This guide briefly explains how to reset the automatic transmission of the Land Rover Evoque by following these simple and quick steps. First, get in…
Land Rover Evoque (2011-2018 / L538, MK 1) In this short tutorial, you will see how to unlock the automatic transmission in the Land Rover Evoque, a very simple and quick operation to perform …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos