Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : Land Rover Evoque Cabin Air Filter Replacement

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Cabin air filter
Operation: Land Rover Evoque Cabin Air Filter Replacement

We see in this guide the instructions that will allow us to remove and replace the cabin air filter of the Land Rover Evoque. First of all we get on board the car, on the front passenger side and start by removing the clips located on the side plastic cover, in order to remove it; after which we remove the cover of the pollen filter box, in order to extract it, as shown in the video. At this point we are going to install the new passenger compartment air filter, inserting it in the correct direction (usually indicated with arrows printed on the filter).


Posted on 11 October 2022 by ScegliAuto



What is the fuse layout of the Land Rover Evoque?
Land Rover Evoque (2018-2024 / MK 2, L551) If some devices in our Land Rover Evoque have suddenly stopped working, we can first check the status of the corresponding fuses whose diagrams are i
How do I replace the cabin filter on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the cabin filter of the Land Rover Evoque, it is necessary to loosen the screws that secure the panel positioned immediately unde
How to replace the fuel filter in Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In this video we can see how to replace the diesel filter in the Land Rover Evoque. It is a very simple operation, the tools we need are: a small fla

    Frequently Asked Questions

    • Evoque 2011-2018 - What is the position of the air conditioning filter on the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is Land Rover Evoque cabin air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos