Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, you can see how to replace the diesel fuel filter on a Land Rover Evoque. This is a very simple operation.

The tools you need are: a small flathead screwdriver, 7mm, 8mm, and 10mm wrenches, and a 6mm Allen wrench. Start by disconnecting the intake manifold and the air filter box, then remove the engine cover.

At this point, remove the metal plate in front of the filter and unscrew the 3 fastening screws with the Allen wrench. Finally, disconnect the connector and hoses, and proceed with the filter replacement, reassembling everything in reverse order.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in the 2013 Land Rover Evoque
How to Replace the Air Filter in the 2013 Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Regularly replacing the engine air filter in your first-generation Land Rover Evoque (year 2013) is very important as it prevents potential overheati…
Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Replace the Cabin Air Filter in a Land Rover Evoque
How to Replace the Cabin Air Filter in a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the cabin air filter in a Land Rover Evoque, loosen the screws securing the panel located directly under the glove compartment on the pass…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos