Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Panel of the Rear Hatch of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Door trim panel

Today, you will discover the steps to remove the inner panel of the rear hatch of the Land Rover Evoque trunk. First, open the rear hatch and start prying on the sides of the panel to detach it from the internal plastic clips; this will give you access to the inside of the rear hatch, as shown in the video. At this point, make any necessary repairs or replacements, and reattach the inner trim of the door, following the video tutorial to the end!

Posted on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Land Rover Range Rover Evoque
How to replace the rear headlight bulbs of the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today we will discover the process of disassembling and replacing the bulbs of the rear light of the Land Rover Range Rover Evoque, in simple steps. …
Removing the Front Door Panel of the Land Rover Evoque
Removing the Front Door Panel of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the procedure to remove and replace the front door panel of the Land Rover Evoque. First, open the front door and start unscr…
How to Replace the Auxiliary Battery in a Land Rover Evoque?
How to Replace the Auxiliary Battery in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the auxiliary battery in a Land Rover Evoque, go inside the cabin and remove the panel located directly under the glove compartment. Once …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos