Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Selector on a Range Rover?

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Transmission

See other generations:
Video tutorial

To replace the gear selector on a Range Rover, remove the cover from the top of the selector. This will allow you to take out the center screw and remove the selector itself.

Once the old selector is removed, position the new replacement part and secure it with the center screw. Finally, reinstall the cover on top of the selector that was previously removed.

After completing the installation, check the proper operation of the part before driving.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Unlock the Automatic Transmission of the Range Rover Sport?
How to Unlock the Automatic Transmission of the Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) To unlock the automatic transmission of the Range Rover Sport, disconnect the six pins that secure the shift selector trim panel to the center consol…
Removing the Automatic Transmission Selector on a Range Rover
Removing the Automatic Transmission Selector on a Range Rover
Land Rover Range Rover (2012-2021 / MK 2) In this video tutorial, you will learn how to remove the automatic transmission selector from a Range Rover. First, get inside the vehicle and use a …
How do the air suspensions of the Land Rover Range Rover work?
How do the air suspensions of the Land Rover Range Rover work?
Land Rover Range Rover (2002-2012 / L322, MK 3) The air suspension of the Land Rover Range Rover allows you to raise or lower the car's height depending on driving comfort or road conditions that n…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos