Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Range Rover
  6. : How to change the oil and engine filter on a Range Rover Sport

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Engine oil
Operation: How to change the oil and engine filter on a Range Rover Sport

How to change the oil and engine filter on a Range Rover Sport? Let's see how to proceed with the replacement: we lift the car on a column bridge and unscrew the pin of the oil sump, let the oil flow into a container (we can also suck the liquid with a special tool). We bring the car back to the ground, then, we open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a socket wrench we unscrew the oil filter, extract it and place a new one, making it adhere well around the thread. We top up with the new oil.


Posted on 10 November 2023 by ScegliAuto



How to replace the Land Rover Sport engine oil filter
Land Rover Range Rover (2002-2012 / MK 3, L322) Replacing the engine oil and its filter is a very important maintenance especially in engines such as the one from the Range Rover Sport which has a
How to reset the service light on a 2009 Range Rover Sport
Land Rover Range Rover (2002-2012 / MK 3, L322) In this video we can see the procedure for resetting the service light on the 2009 Range Rover Sport in case the car was serviced but the light remai
Land Rover Range Rover Sport diesel filter replacement
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see in this guide how to remove and replace the diesel filter of the Land Rover Range Rover Sport, following these simple steps. First of all w

Other guides that may interest you

    Frequently Asked Questions

    • Range Rover 2002-2012 - How much does the service cost of the Range Rover sport? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos