Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : How to replace the Land Rover Sport engine oil filter

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Oil filter
Operation: How to replace the Land Rover Sport engine oil filter

Replacing the engine oil and its filter is a very important maintenance especially in engines such as the one from the Range Rover Sport which has a chain distribution: the advice is to carry out this maintenance every 20,000 km or in any case once a day. year; to carry out this operation, the protection plate of the oil sump must be removed by removing the relative fixing screws present along the contour; at this point both the oil pan and the filter located in the front part of the engine, near the oil cooler itself, are easily accessible; in order to unscrew it, it is recommended to use a clamp wrench.


Posted on 12 December 2023 by ScegliAuto



Land Rover Range Rover Sport diesel filter replacement
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see in this guide how to remove and replace the diesel filter of the Land Rover Range Rover Sport, following these simple steps. First of all w
How do I replace the cabin filter on the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) In order to replace the cabin filter of the Land Rover Range Rover Sport, you need to press the appropriate button on the dashboard that allows you t
How to replace the cabin filter on the Land Rover Range Rover Sport L332?
Land Rover Range Rover (2002-2012 / MK 3, L322) The replacement of the cabin filter of the Land Rover Range Rover Sport L332 is carried out by opening the glovebox on the passenger side, releasing

Other guides that may interest you

    Frequently Asked Questions

    • Range Rover 2002-2012 - Where is the Range Rover Sport 3.0 diesel filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos