Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Oil on a Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Engine oil

Oil and filter replacement on a Range Rover? Let's see how to do it. Open the vehicle's door, pull up the hood release lever, and lift the front hood. Secure it with the prop rod. Remove the engine soundproofing panel, then unscrew the oil filter with the appropriate wrench. Install a new filter, and reattach the filter container cap. Reinstall the engine cover panel. Lift the vehicle and drain the old oil into a disposal container. Refill with new oil. Close the front hood after maintenance.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the transmission fluid in a Land Rover Range Rover, lift the vehicle to access the bolts securing the oil pan located at the bottom of the…
Land Rover Range Rover (2012-2021 / MK 2) To check the oil level of the Land Rover Range Rover, turn on the ignition so you can press the OK button located on the left side of the steering wh…
Land Rover Range Rover (2012-2021 / MK 2) In this guide, we will look at the information on how to perform the routine maintenance service by replacing the engine oil and oil filter for the L…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos