Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Battery Located in the Land Rover Velar?

Model: Land Rover Velar MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

Video tutorial

In this video, you can see where the battery is located in the Land Rover Velar, useful in case you need to replace it or, as shown in the video, recharge it. As shown, the battery is located inside the engine compartment, specifically behind the right headlight and next to the plastic cover.

If you need to recharge it, simply lift the red cap on the positive terminal, connect the corresponding clamp, and attach the negative to the indicated bolt on the shock absorber mount.

Avoid allowing the two terminals to touch.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Change the Battery on the Land Rover Range Rover Velar
How to Change the Battery on the Land Rover Range Rover Velar
Land Rover Velar (2017-2024 / MK 1) Let's discover in this video the steps to remove and replace the battery on the Land Rover Range Rover Velar. First, locate the battery in the trunk;…
Guide to Replacing the Battery in the Land Rover Velar
Guide to Replacing the Battery in the Land Rover Velar
Land Rover Velar (2017-2024 / MK 1) Follow the instructions below to remove and replace the battery in the Land Rover Velar. In this vehicle, the battery is located in the trunk, not un…
How to disconnect the battery of the Land Rover Velar
How to disconnect the battery of the Land Rover Velar
Land Rover Velar (2017-2024 / MK 1) In this guide, we will see the instructions that will allow us to access the battery and how to disconnect it from the Land Rover Velar. First of all…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos