Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Service warning light

To reset the service light on the Land Rover Freelander 2, start by pressing and holding the button under the odometer. At the same time, turn on the ignition without starting the engine. Keep holding the button until the "service" message stops flashing. Now, press the same button until the "dist" message appears, followed by "end", then "dist" again, and finally "date". Hold the same button until the "reset" message appears, then it will automatically show "end". Press it once more to display "end" and hold it to show the new mileage. At this point, you can turn off the ignition and turn it back on to check that the reset was successful.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the Land Rover Freelander
How to Reset the Service on the Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) In today's video, see how to remove the annoying expired service warning in your second generation Land Rover Freelander. This operation is necessary…
How to Reset the Service Light on a Land Rover Freelander 2
How to Reset the Service Light on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) To manually reset the service light that stays on the dashboard of your Land Rover Freelander Mk2, read the following guide and follow the steps desc…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos