Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the passenger airbag of the Land Rover Discovery?

Model: Land Rover Discovery MK 5, Discovery 5, L462 - Years 2017-2023
Part: Checks and maintenance

To deactivate the passenger airbag of the Land Rover Discovery, you need to turn on the instrument panel, then press the MENU button located on the left side of the steering wheel. This will give you access to the menu on the instrument panel, where you can select "Vehicle settings" and then "Passenger airbag". By selecting "Change settings", you can change the setting from ON to OFF, deactivating the passenger airbag. To reactivate it, simply switch the setting back to ON, making sure that the indicator light also turns off.


Posted on 12 May 2024 by ScegliAuto



How do you deactivate the passenger airbag of the Land Rover Discovery?
Land Rover Discovery (2010-2016 / LR4, Discovery 4, MK 4) In order to deactivate the passenger airbag of the Land Rover Discovery, you need to open the front passenger door so that you can access the corresp
How do I deactivate the Land Rover Discovery's electronic handbrake?
Land Rover Discovery (2010-2016 / LR4, Discovery 4, MK 4) In order to deactivate the Land Rover Discovery's electronic handbrake, you need to open the hood of the car, so that you can access the components b
How to deactivate the immobilizer on the Land Rover Discovery
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) Briefly, we will see the instructions that will show us how to deactivate the immobilizer of the Land Rover Discovery, thus performing a real bypass.

Other guides that may interest you

    Frequently Asked Questions

    • Discovery 2010-2016 - "Incorrect diesel exhaust fluid quality detected" message in the Land Rover Discovery, what does it mean? Read Answer

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos