Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Lexus RX450 key remote control battery replacement

Model: Lexus RX MK 3, Al10 - Years 2008-2015
Part: Key

In this short video guide we will see how to remove and replace the remote control battery of the key of a Lexus RX 450, but also on other models of the manufacturer. Let's go then to open the remote control in two parts, in order to separate it into two bodies; then we pry something pointed in the central part and open the remote control, as in the video. At this point we access the battery: then remove it and replace it with the new one, of the right type (in this case a 2032). Let's mount it than insert it in the correct direction and close the two remote control shells!

Posted on 12 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Lexus RX450?
How to reset the tire pressure light in the Lexus RX450?
Lexus RX (2016-2022 / MK 4, Al20) In this tutorial, we can see how to reset the tire pressure warning light in the Lexus RX450, an extremely simple and quick operation, to be carried …
How to reset the service light on the Lexus RX450 H
How to reset the service light on the Lexus RX450 H
Lexus RX (2016-2022 / MK 4, Al20) The service warning light reset on a Lexus RX450 H vehicle is performed after the service. To perform the service warning light reset, we will need t…
Replacing the remote control battery on the Lexus RX
Replacing the remote control battery on the Lexus RX
Lexus RX (2016-2022 / MK 4, Al20) Today we will see the step by step instructions to remove and replace the key remote control battery on the Lexus RX, from 2016 to 2021. First, let's…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos