Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Lexus RX350.

Model: Lexus RX Alh10, Ala10 - Years 2022-2026
Part:

Let's see how to reset the tire pressure warning light on the Lexus RX350: first of all, check the tire pressure with a reliable gauge, then turn on the ignition, find the TPMS button under the dashboard, near the steering column; press and hold it until the TPMS light blinks 3 times. Release the button, start the engine, and drive for 15-20 minutes. For models with a display, use the buttons on the steering wheel to navigate the menu and look for the "TPMS" or "Tire pressure" section. Select "set pressure" or "reset." Confirm the operation and then drive for automatic calibration.

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on a 2009 Lexus RX350
How to reset the tire pressure light on a 2009 Lexus RX350
Lexus RX (2008-2015 / MK 3, Al10) The tire pressure warning light on the instrument panel of your 2009 Lexus RX350 lights up when a puncture or incorrect inflation pressure is detecte…
How to reset the tire pressure light in the Lexus RX350?
How to reset the tire pressure light in the Lexus RX350?
Lexus RX (2016-2022 / MK 4, Al20) In this tutorial we can see how to reset the tire pressure light in the Lexus RX350, an extremely simple and quick operation, to be done only once th…
How to reset the tire pressure sensor of the 2018 Lexus RX350
How to reset the tire pressure sensor of the 2018 Lexus RX350
Lexus RX (2016-2022 / MK 4, Al20) If the tire pressure warning light on the instrument panel of your 2018 Lexus RX350 continues to illuminate despite no pressure loss or punctures, th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos