Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the 2018 Lexus RX350

Model: Lexus RX MK 4, Al20 - Years 2016-2022
Part:

If the tire pressure warning light on the instrument panel of your 2018 Lexus RX350 continues to illuminate despite no pressure loss or punctures, then you must proceed with the following manual reset. First, enter the car and reach the driver's seat, then insert the key and start the instrument panel. At this point, press the button with the right arrow several times and scroll through the on-board menu until you find the vehicle settings. Next, press the "TPMS" option and proceed with resetting the warning light in question. Once finished, exit the menu and turn off the instrument panel.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on a 2009 Lexus RX350
How to reset the tire pressure light on a 2009 Lexus RX350
Lexus RX (2008-2015 / MK 3, Al10) The tire pressure warning light on the instrument panel of your 2009 Lexus RX350 lights up when a puncture or incorrect inflation pressure is detecte…
How to reset the tire pressure light in the Lexus RX350?
How to reset the tire pressure light in the Lexus RX350?
Lexus RX (2016-2022 / MK 4, Al20) In this tutorial we can see how to reset the tire pressure light in the Lexus RX350, an extremely simple and quick operation, to be done only once th…
How to reset the tire pressure warning light on the Lexus RX350.
How to reset the tire pressure warning light on the Lexus RX350.
Lexus RX (2022-2026 / Alh10, Ala10) Let's see how to reset the tire pressure warning light on the Lexus RX350: first of all, check the tire pressure with a reliable gauge, then turn on …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos