Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Tyre

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Wheel

See other generations:
This video is currently unavailable

First, loosen the wheel bolts of the tyre to be replaced using the appropriate spanner. Once this is done, lift the car with a jack at the location of the tyre to be replaced.

Remove the tyre after taking off the bolts that hold it in place. Fit the new tyre and insert the bolts into the designated holes.

Finally, lower the car using the jack and tighten the bolts with the appropriate spanner. For a more secure fastening of the wheel, tighten the bolts in a diametrically opposite order.

That is, tighten one bolt and then immediately tighten the bolt directly opposite. The car on which this maintenance operation was performed is a Lexus IS.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Light on a Lexus IS 250?
How to Reset the Tyre Light on a Lexus IS 250?
Lexus IS (2005-2013 / MK 2) In this tutorial, we will see how to reset the tyre light on a Lexus IS 250, a very simple and quick operation to perform only after restoring the co…
Checking Tyre Pressure
Checking Tyre Pressure
Lexus IS (2005-2013 / MK 2) Checking the inflation pressure of the tyres is an aspect not to be overlooked, as it affects many factors such as grip, fuel consumption, and the li…
How to Reset the Tyre Warning Light on the Lexus IS 300?
How to Reset the Tyre Warning Light on the Lexus IS 300?
Lexus IS (2013-2024 / MK 3) In this tutorial, see how to reset the tyre warning light on the Lexus IS 300, a very simple and quick operation to perform only after restoring the …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos