Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking Tyre Pressure

Model: Lexus IS MK 2 - Years 2005-2013
Part: Tires

Checking the inflation pressure of the tyres is an aspect not to be overlooked, as it affects many factors such as grip, fuel consumption, and the lifespan of the tyre itself; inside the door pillar, there is a label that shows the reference pressure values classified according to the tyre sizes and the vehicle's load condition. Once the correct value is identified, use a pressure gauge to check the inflation pressure. The check should be done when the tyres are cold, as the heat generated from rolling increases the pressure, which would skew the reading.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning on the Lexus IS
How to reset the tire pressure warning on the Lexus IS
Lexus IS (2005-2013 / MK 2) Today we will see the steps that will allow us to reset the tire pressure warning on the Lexus IS; before performing the TPMS sensor reset, it is nec…
How to reset the tire pressure warning light on the Lexus IS
Lexus IS (2005-2013 / MK 2) Below we will see the instructions that will allow us to reset the tire pressure warning of the Lexus IS; before performing the TPMS sensor reset, it…
How to perform the learning of TPMS sensors on the Lexus IS
How to perform the learning of TPMS sensors on the Lexus IS
Lexus IS (2013-2024 / MK 3) Today we will see the steps that will allow us to carry out the learning of the tire pressure sensors of the Lexus IS, thus resetting the TPMS warnin…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos