Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Engine Pulley

Model: Lexus GS - Years 1991-1997
Part: Engine

Many engine pulleys are equipped with a damping element designed to reduce vibrations generated by the engine operation. This rubber component tends to deteriorate over time and, before completely detaching, begins to produce noticeable noise. Therefore, it is essential to replace the pulley before it fails. Lift the vehicle and remove the lower cover, then detach the auxiliary belt and remove the engine pulley. Once on the workbench, a special puller is required to replace the pulley.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus GS (2005-2011 / S190) Removing the original car radio requires the removal of some trim elements from the centre console: start by unscrewing the gear lever knob after pos…
Instructions for Front Headlight Restoration
Lexus GS (2005-2011 / S190) Due to weather conditions, sunlight, car wash detergents, and the aging of the material itself, headlights tend to become cloudy, making them not onl…
How to reset the tire pressure light in the Lexus GS 300?
How to reset the tire pressure light in the Lexus GS 300?
Lexus GS (2005-2011 / S190) In this tutorial we can see how to reset the tire pressure light in the Lexus GS 300, an extremely simple and quick operation, to be done only once t…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos