Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lincoln
  4. :
  5. Lincoln Mkx
  6. : Front bumper

Lincoln Mkx - Front bumper

Lincoln Mkx (2016-2018 / MK 2)
How do you remove the front bumper of the Lincoln Mkx?

The front bumper of the Lincoln Mkx is installed using a series of screws and hooks. While the hooks can be released by hand in the final stage of the process, …read all…
Posted on 12 July 2023 by ScegliAuto
Lincoln Mkx (2007-2015 / MK 1)
How do you remove the Lincoln MKX's front bumper?

In order to remove the Lincoln MKX's front bumper, you need to loosen the screws that are located in the upper part of the piece: to access these screws it …read all…
Posted on 31 May 2022 by ScegliAuto

Car stereo (2) Battery (3) Key (3) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (2) Headlight bulb (1) Rear light bulb (2) Engine oil (2) Door panel (1) Front bumper (2) Brake pads (2) Instrument cluster (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos