Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Mkx
    4. : How do you remove the Lincoln MKX's front bumper?

Lincoln Mkx - Video tutorial

Model: Lincoln Mkx MK 1 - Years 2007-2015
Part: Front bumper
Operation: How do you remove the Lincoln MKX's front bumper?

In order to remove the Lincoln MKX's front bumper, you need to loosen the screws that are located in the upper part of the piece: to access these screws it will therefore be necessary to open the hood. In this way the screws can be unscrewed and the rivets placed in the same area can be completely removed. Subsequently it will be necessary to unscrew the screws located inside the wheel arches of the front wheels, so that the bumper can be completely detached. After removing the old bumper, it will be possible to insert the new one, fixing it properly.


Posted on 31 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos