Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on the Lincoln MKX

Model: Lincoln Mkx MK 1 - Years 2007-2015
Part: Headlight

In today's video tutorial, you will see how to remove and replace the headlights on the Lincoln MKX, following the instructions provided below. First, open the hood of your car and start unscrewing the mounting screws located at the top of the bumper grille to remove it; then unscrew the screws located on both sides of the front wheel wells, as shown in the video. At this point, gently detach the bumper from the sides to unscrew all the screws of the headlight; disconnect the bulb connectors and replace the headlight assemblies with new ones!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…
How do you replace the battery of the Lincoln MKX?
How do you replace the battery of the Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) In order to replace the battery of the Lincoln MKX, you need to open the hood so that you can access the components located inside the engine compart…
How to Replace the Cabin Filter in a Lincoln MKX?
How to Replace the Cabin Filter in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) As you can see in this tutorial, replacing the cabin filter in a Lincoln MKX is an extremely simple and cost-effective task. First, sit in the passen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos