Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight of the Lincoln Navigator

Model: Lincoln Navigator U326 - Years 2007-2017
Part: Headlight

In today's video, you will see a very simple DIY maintenance operation related to the Lincoln Navigator. This operation is useful if you need to work on the front section. Specifically, learn how to completely remove the headlights and proceed with replacing the bulbs or the headlight itself if necessary. Open the hood and start by unscrewing the mounting screws located on the headlight housing. Once done, pull the piece out of its socket and disconnect the power connectors. Proceed to replace the bulbs if necessary.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Headlight Bulb on a Lincoln Navigator
How to Replace a Headlight Bulb on a Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) If you need to replace a headlight bulb on this vehicle, the following description provides the steps to follow for a proper replacement. Once you op…
How to Replace the Air Filter on a 2000 Lincoln Navigator
How to Replace the Air Filter on a 2000 Lincoln Navigator
Lincoln Navigator (1998-2002 / Un173) If your 2000 Lincoln Navigator's engine frequently overheats, it is time to replace the air filter. This operation can be done independently even wit…
How to Replace the Front Brake Pads of the Lincoln Navigator
How to Replace the Front Brake Pads of the Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) Today, you will see in this video tutorial how to remove and replace the front brake pads of the Lincoln Navigator. First, raise the vehicle and remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos