Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Headlight Bulb on the Lincoln Navigator

Model: Lincoln Navigator U326 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

If you want to replace the headlight bulb on this vehicle model, you will find useful information for the replacement in the description below, and you can also refer to the video. Once you open the hood, locate the headlight assembly where the bulb needs to be replaced and unscrew the mounting screws located above it. Then disconnect the electrical connector behind it and remove the headlight assembly.

Next, unscrew the bulb that needs to be replaced, disconnect the power connector, and take the new bulb to install it and screw it back in. Finally, reconnect the power connector and reassemble the headlight assembly.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace a Headlight Bulb on a Lincoln Navigator
How to Replace a Headlight Bulb on a Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) If you need to replace a headlight bulb on this vehicle, the following description provides the steps to follow for a proper replacement. Once you op…
How to Remove the Headlight of the Lincoln Navigator
How to Remove the Headlight of the Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) In today's video, you will see a very simple DIY maintenance operation related to the Lincoln Navigator. This operation is useful if you need to work…
Where to Find the Cabin Fuse Box of the Lincoln Navigator
Where to Find the Cabin Fuse Box of the Lincoln Navigator
Lincoln Navigator (2018-2025 / U554) The cabin fuse box in your new Lincoln Navigator is well hidden for safety reasons, making it difficult to locate on your own. Carefully read the fol…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos