Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Lincoln MKX

Model: Lincoln Mkx MK 2 - Years 2016-2018
Part: Headlight bulb

Today's step-by-step instructions will show us how to disassemble and replace the headlight bulb of the Lincoln MKX. First, we open the hood of the car and start by removing the plastic bulb protection cap; then we disconnect the electrical connector and the bulb holder, removing the latter along with the low beam light, as shown in the video. At this point, we replace the bulb with the new one, of the correct type and with the same attachment; we reassemble and connect the light, checking its operation, finally fixing the plastic cap.

Posted on 8 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Lincoln MKX?
How to Replace the Headlight Bulb on a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the headlight bulb on a Lincoln MKX, open the hood to access the back of the corresponding headlight. Disconnect the connector located at …
How to Replace the Headlights on the Lincoln MKX
How to Replace the Headlights on the Lincoln MKX
Lincoln Mkx (2007-2015 / MK 1) In today's video tutorial, you will see how to remove and replace the headlights on the Lincoln MKX, following the instructions provided below. First…
Replacing a Brake Light on a Lincoln MKX
Replacing a Brake Light on a Lincoln MKX
Lincoln Mkx (2007-2015 / MK 1) How to replace the brake light bulb in the rear headlamp of a Lincoln MKX by yourself. The replacement bulb costs $7.50 on major e-commerce platforms…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos