Do it yourself
| ||||
|
Lincoln Mkt - Video tutorial
Model: Lincoln Mkt
MK 1
- Years 2010-2019 In this guide, we will see the steps on how to disassemble and replace the headlight bulb of the Lincoln MKT, following the instructions below. First, we remove the plastic partition found on the top part of the front bumper. After that, we remove the front wheel arch, gently releasing the bumper on the sides as shown in the video. At this point, we remove the plastic cover and disconnect the xenon bulb's electrical connector. Then, we install the new original low beam bulb and reassemble everything by applying the reverse procedure!
Posted on 7 July 2023 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |