Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper on the Lincoln MKT

Model: Lincoln Mkt MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

Video tutorial

In this short and simple guide, you will find the main instructions to remove and replace the front bumper on the Lincoln MKT. First, open the hood and start by removing the screws located at the top of the bumper; then unscrew the additional screws found on both sides of the front wheel wells and under the bumper, as shown in the video.

Now gently detach the bumper from the sides until it is completely removed; then proceed to reinstall the front bumper by reversing the procedure!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Rotors and Pads on the Lincoln MKT
Replacing the Front Brake Rotors and Pads on the Lincoln MKT
Lincoln Mkt (2010-2019 / MK 1) In this guide, we will go through the steps to remove and replace the front brake rotors and pads on the Lincoln MKT. First, remove the front wheel b…
How to Replace the Headlight Bulb on the Lincoln MKT
How to Replace the Headlight Bulb on the Lincoln MKT
Lincoln Mkt (2010-2019 / MK 1) This guide outlines the steps to remove and replace the headlight bulb on the Lincoln MKT, following the instructions provided below. First, remove t…
Location of the Fuse Boxes on Lincoln MKT.
Location of the Fuse Boxes on Lincoln MKT.
Lincoln Mkt (2010-2019 / MK 1) In this video tutorial, you can see where the fuse boxes are located on the Lincoln MKT, following a few simple steps that will help you manage your …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos