Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lincoln
  4. :
  5. Mkx
  6. : Replacing a brake light on a Lincoln MKx.

Lincoln Mkx - Video tutorial

Model: Lincoln Mkx MK 1 - Years 2007-2015
Part: Rear light bulb
Operation: Replacing a brake light on a Lincoln MKx.

How to replace the stop light bulb of the rear headlight of a Lincoln MKx by yourself. The replacement bulb costs 7.50 euros on major e-commerce platforms (+2.70 for shipping). To remove the headlight cover, remove the two screws located on the side of the headlight with a 5.16 wrench (approximately 13 mm). Once these two screws are removed, simply pull the headlight towards you to remove it. Remove the non-functioning bulb and replace it with the new one. Be careful not to touch it with bare hands, or it will no longer emit the white light for which it was purchased. At this point, all you need to do is reposition the headlight and reattach the two screws. Job done.


Posted on 21 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos