Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Brake Pads on the Lincoln MKX

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

In this brief guide, follow the step-by-step instructions to remove and replace the rear brake pads on the Lincoln MKX. First, lift the vehicle at the rear and begin removing the wheel; then, unscrew the bolts securing the brake caliper, removing it from the brake rotor, as shown in the video.

At this point, remove the old brake pads by pressing the caliper piston to retract it; then clean off any residual dirt and install the new, high-quality brake pads, applying the reverse procedure!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Lincoln Mkx (2007-2015 / MK 1) To replace the front brake pads on a Lincoln MKX, lift the vehicle so you can remove the bolts securing the front wheel corresponding to the pads to …
Lincoln Mkx (2007-2015 / MK 1) How to replace the brake light bulb in the rear headlamp of a Lincoln MKX by yourself. The replacement bulb costs $7.50 on major e-commerce platforms…
Lincoln Mkx (2016-2018 / MK 2) Replacing the battery in the key fob for a 2016 Lincoln MKX is a simple and quick task you can do yourself. To perform this operation, insert a flath…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos