Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake pads of the Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

These short and simple instructions will show us how to disassemble and replace the brake pads of the Lincoln MKZ. First, we lift the vehicle and start disassembling the front wheel; then we unscrew the fastening screws of the front brake caliper, removing it from the caliper support, as shown in the video.

At this point, we remove the old brake pads to install the new ones, as well as the original ones; we clean the caliper from any residual dirt and reassemble the braking system (replacing the brake discs if necessary), following the video tutorial until the end!


Posted on 12 June 2025 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Lincoln MKZ
Replacing the Front Brake Pads on the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, we will go through the necessary steps to remove and replace the front brake pads on the Lincoln MKZ in simple and quick steps. First, lift th…
How to Replace the Cabin Air Filter in a Lincoln MKZ
How to Replace the Cabin Air Filter in a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, you will learn how to replace the cabin air filter in a Lincoln MKZ. First, get inside the cabin and open the glove compartment. Once removed,…
How to Replace the Key Fob Battery for the Lincoln MKZ?
How to Replace the Key Fob Battery for the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the key fob battery for the Lincoln MKZ, press the button located on the bottom of the device to extract the key inside the fob. After rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos