Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Lincoln Navigator

Model: Lincoln Navigator U326 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Brake pads

See other generations:
Video tutorial

Today, you will see in this video tutorial how to remove and replace the front brake pads of the Lincoln Navigator. First, raise the vehicle and remove the front wheel; then unscrew the bolts securing the front brake caliper to remove it from the rotor, as shown in the video.

At this point, remove the old brake pads by pushing the caliper piston back; clean the caliper from dirt and install the new high-quality brake pads, checking the wear condition of the brake rotor (replacing it if worn).


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Where to Find the Cabin Fuse Box of the Lincoln Navigator
Where to Find the Cabin Fuse Box of the Lincoln Navigator
Lincoln Navigator (2018-2025 / U554) The cabin fuse box in your new Lincoln Navigator is well hidden for safety reasons, making it difficult to locate on your own. Carefully read the fol…
How to Replace the Air Filter on a 2000 Lincoln Navigator
How to Replace the Air Filter on a 2000 Lincoln Navigator
Lincoln Navigator (1998-2002 / Un173) If your 2000 Lincoln Navigator's engine frequently overheats, it is time to replace the air filter. This operation can be done independently even wit…
How to Replace the Key Fob Battery in a Lincoln Navigator?
How to Replace the Key Fob Battery in a Lincoln Navigator?
Lincoln Navigator (2018-2025 / U554) As seen in this tutorial, replacing the key fob battery in a Lincoln Navigator is a very simple and quick task. To do this, you will need a small fla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos