Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years 2013-2020
Part: Brake pads

Today, we will go through the necessary steps to remove and replace the front brake pads on the Lincoln MKZ in simple and quick steps. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the brake caliper located at the back, removing the caliper from the rotor, as shown in the video. At this point, remove the metal clip and detach the old brake pads; apply pressure to the caliper piston to retract it, allowing you to install the new ones. Then, reassemble the braking system!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake pads of the Lincoln MKZ
How to replace the brake pads of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) These short and simple instructions will show us how to disassemble and replace the brake pads of the Lincoln MKZ. First, we lift the vehicle and sta…
How to open the hood of the Lincoln MKZ
How to open the hood of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today's steps will show us how to open the hood of the Lincoln MKZ, following the instructions below. First, we open the front driver's side door and…
How to Change the Time on a 2018 Lincoln MKZ
How to Change the Time on a 2018 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) If you own a second-generation 2018 Lincoln MKZ and want to learn how to manually change the time displayed on the dashboard, just carefully read the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos