Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

Today's steps will show you how to open the hood of the Lincoln MKZ, following the instructions below. First, open the driver's side front door and pull the hood release lever located at the bottom; then move to the front of the vehicle and disengage the hood lock pin found between the grille and the hood itself to raise it, as shown in the video.

At this point, lower the hood again to close it, guiding it down to secure it.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Lincoln MKZ?
How to Replace the Air Filter on a Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the air filter on a Lincoln MKZ, open the hood to access the components inside the engine compartment. The box containing the filter is lo…
How to Replace a Headlight Bulb on a Lincoln MKZ
How to Replace a Headlight Bulb on a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) If you need to replace the burned-out headlight bulb on this Lincoln MKZ, you can find the instructions on how to proceed in this description, along …
How to Change the Time on a 2018 Lincoln MKZ
How to Change the Time on a 2018 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) If you own a second-generation 2018 Lincoln MKZ and want to learn how to manually change the time displayed on the dashboard, just carefully read the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos