Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Lincoln MKX

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Lincoln MKX, lift the vehicle so you can remove the bolts securing the front wheel corresponding to the pads to be replaced. After removing the wheel, loosen the screws that secure the brake caliper, which must be detached from the rotor by extracting the pads inside it. Once the old pads are removed, install the new ones, securing the brake caliper and the corresponding wheel with the appropriate bolts.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on the Lincoln MKX
Replacing the Rear Brake Pads on the Lincoln MKX
Lincoln Mkx (2007-2015 / MK 1) In this brief guide, follow the step-by-step instructions to remove and replace the rear brake pads on the Lincoln MKX. First, lift the vehicle at th…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos