Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lincoln
  4. :
  5. Navigator
  6. : How to replace a headlight bulb on the Lincoln Navigator

Lincoln Navigator - Video tutorial

Model: Lincoln Navigator U326 - Years 2007-2017
Part: Headlight bulb
Operation: How to replace a headlight bulb on the Lincoln Navigator

If we need to replace a headlight bulb on this car, in the description that follows we will find the instructions and the operation to follow for a correct replacement. Once the engine compartment is open, insert your hand behind the headlight where the bulb to be replaced is located. Then remove the rear cap and then disconnect the power supply terminal. Then release the lamp fixing pin and then extract it. Replace it with the new one and then proceed to fix the clips again, reconnect the clamp and close the cap.


Posted on 23 July 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos