Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on a Lincoln MKX?

Model: Lincoln Mkx MK 2 - Years: 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear door panel on a Lincoln MKX, a very simple and quick operation. First, go inside the cabin, then pry off the small indicated cover and, using a 6mm wrench, remove the bolt located inside the hole.

Repeat the process on the side edge, unscrew the screws on the bottom side, and pry along the perimeter of the panel with a plastic spatula until it is completely detached. At this point, you can disconnect both the lock and the window regulator connector and install the replacement part if needed.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…
Replacing the Rear Brake Pads on the Lincoln MKX
Replacing the Rear Brake Pads on the Lincoln MKX
Lincoln Mkx (2007-2015 / MK 1) In this brief guide, follow the step-by-step instructions to remove and replace the rear brake pads on the Lincoln MKX. First, lift the vehicle at th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos