Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Lincoln Mkx - Key

Lincoln Mkx (2007-2015 / MK 1)
How to replace the battery in the Lincoln MKX remote control?
As we can see in this tutorial, replacing the battery of the Lincoln MKX remote control is a very simple and inexpensive operation. To do this, we will only …read all…
Posted on 8 May 2023 by ScegliAuto
Lincoln Mkx (2016-2018 / MK 2)
How to retrieve the code to enter the car without a key on the Lincoln Mkx
To enter the Lincoln MKx you need to enter a code. This also happens on the American versions of the Ford Edge. In practice, either you have the key or to …read all…
Posted on 27 July 2022 by ScegliAuto
Lincoln Mkx (2007-2015 / MK 1)
How to change the Lincoln Mkx remote control battery?
Anyone who has already had experience with replacing the batteries of a remote control for any car will have no problem doing it even with the Lincoln Mkx …read all…
Posted on 24 May 2022 by ScegliAuto
Car stereo (2) Battery (3) Key (3) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (2) Headlight bulb (1) Rear light bulb (2) Engine oil (2) Door panel (1) Front bumper (2) Brake pads (2) Instrument cluster (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos