Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery for the Lincoln MKX?

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

Anyone who has experience replacing batteries in a remote for any vehicle will have no trouble doing the same with the Lincoln MKX remote. The procedure is essentially the same as for similar remote models and requires no tools other than a flathead screwdriver or a similar object to pry. To replace the battery, simply remove the emergency key, open the remote by prying with the screwdriver in the designated slot as shown in the video, then remove the dead battery, replace it with a new one, and close the remote.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…
How to Replace the Key Fob Battery on a Lincoln MKX
How to Replace the Key Fob Battery on a Lincoln MKX
Lincoln Mkx (2016-2018 / MK 2) Replacing the battery in the key fob for a 2016 Lincoln MKX is a simple and quick task you can do yourself. To perform this operation, insert a flath…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos