Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Lincoln MKX?

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

As shown in this tutorial, replacing the key fob battery on a Lincoln MKX is a very simple and inexpensive task. For this, you will only need a replacement CR2032 battery and a small flathead screwdriver.

Start by locating the slot on the top edge, then insert the screwdriver into it and, using leverage, separate the two halves of the key fob. Once fully opened, remove the old battery and insert the replacement, ensuring the positive side is facing you. Finally, reassemble the key fob.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Lincoln MKX
How to Replace the Key Fob Battery on a Lincoln MKX
Lincoln Mkx (2016-2018 / MK 2) Replacing the battery in the key fob for a 2016 Lincoln MKX is a simple and quick task you can do yourself. To perform this operation, insert a flath…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos