Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery of a Lincoln

Model: Lincoln Lincoln Various
Part: Key

Video tutorial

This video tutorial shows how to replace the battery of a Lincoln car key fob. To perform the operation, you will need a small flat-head screwdriver and a new battery. Take your key fob and use the tip of the screwdriver to press the lever on the short side of the fob until you remove the main casing.

At this point, still using the screwdriver tip, pry around the edges of the fob to extract the circuit beneath which you will find the battery compartment, and proceed to replace it. The model to use is a flat battery CR 2025.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Lincoln Lincoln Various If you need to replace the remote key battery on this vehicle, you can watch this video and read the instructions below. First, you will need a sharp…
Lincoln Lincoln Various If you are unsure where the fuse box is located in your Lincoln Continental (1998-2002), don't worry; you can easily find it by following these simpl…
Lincoln Lincoln Various To locate the fuse box containing all the fuses for your Lincoln Town (1998-2002), follow these simple steps. First, park the vehicle safely, then en…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos