Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery for the Lincoln MKC

Model: Lincoln Mkc MK 1 - Years 2015-2019
Part: Key

Today, you will learn the instructions and steps to disassemble and replace the battery in the key fob for the Lincoln MKC. First, take your key fob and remove the physical key from inside it. Then, pry off the plastic back cover, and remove the battery inside, as shown in the video. At this point, install the new battery of the correct type (in this case, a 3V CR2450); insert it in the correct orientation and reassemble the key fob, testing its functionality.

Posted on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Lincoln Mkc (2015-2019 / MK 1) As seen in this tutorial, replacing the key fob battery on the Lincoln MKC is an extremely simple and quick task. Before proceeding, get a small flat…
Lincoln Mkc (2015-2019 / MK 1) To replace the battery for the Lincoln MKC, open the hood to access the components inside the engine compartment. The battery will be located at the …
Lincoln Mkc (2015-2019 / MK 1) When you notice that the remote key for your vehicle can no longer unlock it, the remote battery is likely dead. To replace it, you need: a small scr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos