Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery on the Lincoln MKC

Model: Lincoln Mkc MK 1 - Years: 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

If you need to replace the remote key battery on this vehicle, you can follow the simple instructions below and check out the tutorial video. First, extract the security key by pressing the small button on the side.

Use the same security key to pry open the compartment where it is housed to detach the back cover of the key. Underneath, you will find the battery, which you can remove using a sharp object. Then, take the new battery and place it in the compartment, making sure to keep the positive terminal facing up, and then close the cover by pressing it down with your fingers.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Lincoln MKC?
How to Replace the Key Fob Battery on the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) As seen in this tutorial, replacing the key fob battery on the Lincoln MKC is an extremely simple and quick task. Before proceeding, get a small flat…
How to Replace the Key Fob Battery for the Lincoln MKC
How to Replace the Key Fob Battery for the Lincoln MKC
Lincoln Mkc (2015-2019 / MK 1) Today, you will learn the instructions and steps to disassemble and replace the battery in the key fob for the Lincoln MKC. First, take your key fob …
How to Replace the Battery for the Lincoln MKC?
How to Replace the Battery for the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) To replace the battery for the Lincoln MKC, open the hood to access the components inside the engine compartment. The battery will be located at the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos