Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Lincoln Nautilus?

Model: Lincoln Nautilus MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

Video tutorial

To open the hood of the Lincoln Nautilus, go inside the cabin on the driver's side: in the lower left area near the steering column, you will find a lever with the hood open symbol. Pulling this lever upward will unlock the hood latch mechanism: then, insert your hand under the hood to move the yellow pin located at the front.

This will allow you to fully lift the hood, giving you access to all components inside the engine compartment.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Lincoln Nautilus (2019-2026 / MK 1) In today's tutorial, you will see the necessary instructions to perform routine maintenance by replacing the engine oil and oil filter on the Lincoln…
Replace the Remote Battery for the Lincoln Nautilus Key
Replace the Remote Battery for the Lincoln Nautilus Key
Lincoln Nautilus (2019-2026 / MK 1) Let's see in this short and simple guide how to replace the remote battery for the Lincoln Nautilus key. First, take your remote and start removing t…
How to replace the cabin air filter of the 2023 Lincoln Nautilus
How to replace the cabin air filter of the 2023 Lincoln Nautilus
Lincoln Nautilus (2019-2026 / MK 1) To complete the replacement of the air filter inside the cabin of your 2023 Lincoln Nautilus, you must pay attention to all the steps described in th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos