Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handlebar cover fairing of the LML Star 125?

Model: Lml Star 125
Part:

Video tutorial

To replace the handlebar cover of the LML Star 125, you need to loosen the screws that secure the panel in question to its housing: this panel will be located immediately above the front headlight and can be completely removed by loosening the screws that hold it in place.

These screws will be located below the handlebar, and once loosened, the panel can be completely detached: at this point, it will be possible to position the new replacement part and secure it with the appropriate screws, ensuring that everything is functioning correctly.


Posted on 15 January 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of an LML Star 125
How to Remove the Rear Wheel of an LML Star 125
Star 125 Before you can begin, position your LML Star 125 on the centre stand. Start by detaching and removing the left side panel. Next, remove the spare whe…
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Grips on an LML Star 125-150-200
How to Replace the Grips on an LML Star 125-150-200
Star 125 In this short video tutorial, you will see how to remove and replace the original grips on an LML Star 125-150-200, as well as on a Piaggio Vespa PX.…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos