Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Tank from an LML Star 125 - Piaggio Vespa PX

Model: Lml Star 125
Part:

Video tutorial

In this video, we will see how to remove the fuel tank from an LML Star 125, as well as from all 125-150-200 Piaggio Vespa PX models. First, lift the seat and unscrew the two fixing screws with a socket wrench to remove it; then unscrew the screws of the lower bracket and remove the connector cap of the float, as shown in the video.

At this point, disconnect the electrical connector and pull out the tank by lifting it upwards; then disconnect the fuel line that goes to the carburettor and the tap lever!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Star 125 .. gearbox oil of the Lml Star 125, as well as the Piaggio Vespa PX 125. First, place the central stand and start unscrewing the oil drain bolt located.. …
How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
Star 125 .. gear cables on the Lml Star 125, as well as the Piaggio Vespa PX 125. First, remove the rear wheel to create more space; then, unscrew the nuts from.. …
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
Star 125 .. to remove and replace the exhaust on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin unscrewing the exhaust.. …

How to Remove the Engine from the KTM XC-W 300?

To remove the engine from the KTM XC-W 300, loosen the bolts that secure it to its housing in the centre of the frame: once the support bolts are removed, proceed to loosen the bolts securing the exhausts and then disconnect all related connectors. At this point, remove the pin and ring that secure the piston to the connecting rod: you can now access the crankshaft and all other internal components. After any necessary replacement, reassemble the engine to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos