Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star 125
Part: Brake pads

In this tutorial video, you will see how to disassemble and replace the front brake pads on an LML Star 125 in simple and quick steps. First, remove the front wheel by unscrewing the five fixing nuts, then use a pair of pliers to remove the pad retainers, followed by sliding out the pads as shown in the video. Next, clean the caliper of carbon residue and push back the piston; all that’s left is to insert the new brake pads and reassemble everything, following the video to the end!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Rear Brake Shoes on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Rear Brake Shoes on the Piaggio Vespa PX 125 - LML Star 125
Star 125 This guide provides the necessary instructions to remove and replace the rear brake shoes on the Piaggio Vespa PX 125 and the LML Star 125. First, pl…
How to Replace the Rear Brake Shoes on the LML Star 125
How to Replace the Rear Brake Shoes on the LML Star 125
Star 125 In today's tutorial, you will learn how to remove and replace the rear drum brake shoes, as well as the front ones, on the LML Star 125, and also on …

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos