Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on the Piaggio Vespa PX 125 - LML Star 125

Model: Lml Star 125
Part: Brake drums and shoes

Video tutorial

This guide provides the necessary instructions to remove and replace the rear brake shoes on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin by removing the rear wheel, unscrewing the five nuts with a socket spanner; then, unscrew the central nut of the drum to remove it, as shown in the video.

At this point, disconnect the brake shoe spring to remove it, taking out the old brake shoes; then refit the new original ones, applying the reverse procedure of disassembly!


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on the LML Star 125
How to Replace the Rear Brake Shoes on the LML Star 125
Star 125 .. brake shoes, as well as the front ones, on the LML Star 125, and also on the Piaggio Vespa PX 125. First, remove the rear wheel by unscrewing the fixing.. …
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
Star 125 .. the exhaust on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin unscrewing the exhaust bolt connected to the.. …
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Star 125 .. service by replacing the gearbox oil of the Lml Star 125, as well as the Piaggio Vespa PX 125. First, place the central stand and start unscrewing.. …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos