Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the LML Star 125?

Model: Lml Star 125
Part: Engine

Video tutorial

To dismantle the engine of the LML Star 125, loosen the screws that secure the engine block to its housing, unscrewing the screws located at the supports. Once the screws are completely removed, you can loosen those that secure the cylinder to the top of the engine block, completely detaching it and removing the piston from the corresponding connecting rod. This will allow access to the additional internal components, which can then be replaced with new spare parts.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
Star 125 In today's tutorial, you will learn how to remove the engine block from the frame of the Lml Star 125, as well as the Piaggio Vespa PX. First, place …
How to Replace the Starter Motor on the LML Star 125
How to Replace the Starter Motor on the LML Star 125
Star 125 Today's guide will illustrate the main steps to dismantle and replace the starter motor on the LML Star 125, as well as the Piaggio Vespa PX 125. Fir…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos