Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the LML Star 125

Model: Lml Star 125
Part: Engine

Video tutorial

To dismantle the engine of the LML Star 125, loosen the screws that secure the engine block to its housing so that it can be extracted: once the pipes and connectors attached to the engine block are disconnected, it can be completely removed. Then proceed to loosen the screws that secure the cylinder, removing the piston and connecting rod contained within; once these parts are removed, you can replace any other components, reassembling and reinstalling the engine block.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Remove the Exhaust of the Lml Star 125 - Piaggio Vespa Px 125
How to Remove the Exhaust of the Lml Star 125 - Piaggio Vespa Px 125
Star 125 In today's tutorial, you will learn how to remove and replace the exhaust of the Lml Star 125, as well as the Piaggio Vespa Px 125. First, place the …
How to Remove the Rear Wheel of an LML Star 125
How to Remove the Rear Wheel of an LML Star 125
Star 125 Before you can begin, position your LML Star 125 on the centre stand. Start by detaching and removing the left side panel. Next, remove the spare whe…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos