Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mahindra Thar?

Model: Mahindra Thar MK 2 - Years 2020-2026
Part: Service warning light

In this tutorial, you will see how to reset the service light on a Mahindra Thar, a very simple and quick operation that should be done only after completing all scheduled maintenance tasks. First, enter the cabin, then turn on the instrument cluster. Scroll through the various display tabs using the appropriate button until you reach the service screen. Next, press and hold the selection button, turn off the ignition, turn it back on, and keep the button pressed for at least ten seconds. At this point, just verify that the procedure was successful.

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mahindra Thar?
How to Reset the Service Light on the Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) In this tutorial, you will see how to reset the service light on the Mahindra Thar, a very simple operation. Before proceeding, make sure you have co…
How to Reset the Service Light on a Mahindra Thar?
How to Reset the Service Light on a Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) To reset the Service light on a Mahindra Thar, press and hold the menu button located on the lower left side of the dashboard near the steering colum…
How to Replace the Cabin Air Filter in the Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) Replacing the cabin air filter in the Mahindra Thar, as shown in this tutorial, is an extremely simple and quick operation. First, position yourself …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos