Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. E2o
  6. : How to replace the battery elements in the Mahindra E2o

Mahindra E2o - Video tutorial

Model: Mahindra E2o MK 1 - Years 2013-2017
Part: Battery
Operation: How to replace the battery elements in the Mahindra E2o

In this video we will show you how to replace the battery elements in the Mahindra E2o. This car model is equipped with a very large battery which is placed all along the rear trunk. It is a battery made up of several elements, each of which powers different vehicle functions. When the system reports that there is a problem with a particular function, it is necessary to check the battery elements one by one to see if they are all charged. To carry out this check it is sufficient to use a test and with the two probes check the two poles of each element. When you locate that unloaded one it will be enough to replace it with a loaded one.


Posted on 10 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos