Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. E2o
    4. : Guide to using the Mahindra E2o

Mahindra E2o - Video tutorial

Model: Mahindra E2o MK 1 - Years 2013-2017
Part: Checks and maintenance
Operation: Guide to using the Mahindra E2o

Let's find out together, this short guide, the instructions that will allow us to use and start the electric Mahindra E2o, in simple and quick steps. First of all we get on board the car and start pressing the star button, approaching the remote control of the electronic key; then we put the gear lever in mode "B" to start the gear of our car, pressing the accelerator pedal, as shown in the video. Moving the gear lever forward we will find the neutral mode and the reverse mode (like for a classic automatic gearbox)!


Posted on 10 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos